Wireless

2.4GHz

It works in 2.4GHz frequency spectrum.

High output power

Transmit high output power programmable for different country selections.

High Data Rate

High speed transmitting rate up to 108Mbps with Super G, support large payload such as MPEG video streaming.

Multifunction application

Access Point/Client Bridge/Client Router/WDS Function

Long range transmitting

Transmit power control and distance control (ACK timeout)

Narrow Bandwidth

Provide 5MHz/10MHz/20MHz bandwidth selection

Signal Strength Display

RF signal strength status shown LEDs of 3 colors, making network build-up easier. LED indicators have the best transmit and receive signal for traffic communication.

Multiple SSID

4 SSID supported. Each SSID can set itself wireless or WAN access setting.

QoS(WMM)

Enhance performance and density

Networking

PPPoE

Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected.

PPTP

Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks.

VPN Pass Through

Security

802.11i

WEP, WPA, WPA2 (Encryption support TKIP/AES)

MAC address functions

MAC address filter (AP mode)

802.1x

IEEE802.1x Authenticator

Station isolation

L2 Isolation

Management

Firmware Upgrade

Upgrading firmware via web browser, setting are reserved after upgrade

Reset & Backup

Reset to factory default. User can export all setting into a file via WEB

Ping & Trace Route

Built-in PING function & Trace Route function in Web GUI

MIB

MIB I, MIB II(RFC1213) and Private MIB

SNMP

V1, V2c